Now that you have designed your Terry-towels, i.e. hand-sew them, you may want to add binds and scallop. Before we get started you will need to purchase an unadorned Terry towel, or towel of choice. Preferably, you want to select washable cloth, as well as medium-weight material. Consider taffeta, satin, or polyester.
How to create binds and scallop:
Once you have your materials gathered, (1) use tissue paper to create the edge of your scallop. When you draw the edge of the scallop, add an odd figure in the pattern, especially odd enough to create a curve. Create a 1 inch depth, starting at the lower point and work toward the high point. Now with your tissue in hand, fasten it to the towel, using craft pins. Next, use rotary cutters, or sewing scissors to trim the edges of your scallop.
(2) Use your rotary cutters and/or scissors to carve the strip of hems and start piecing the strips, joining it so that it creates your strip bind. Lengthways, press your strip until it folds in half and on the left side. Avoid misleading the width of your strip.
(3) Next, on the right side of your fabric, pin the strip bind. (4) Scant darn quarter inch starting at the raw edges. (5) In the direction of the lower border or edge, press the narrow piece. Over the fabric, fold the binding ends over to the side of your cloth. Press and enfold your bind about the border/edges of your scallop and secure it with pins. Make sure that the pins insert into the trench of the seams. (6) At the trench, begin stitching in the direction of the right plane. On the left plane, baste, using the catch bind scheme.
You have completed your scallop and binding, which is the start of creating your embellished and decorative towels. Towels make great bathroom accessories, since the colors will augment your environment. Now you are ready to add bands and lace trim to your towel.
How to create bands:
To formulate strips, you will need another plain or unadorned towel. Again, you want to consider fabrics, which you can wash by machine. Polyester is good, as well as satins or taffeta. Choose medium-weight cloth. (1) Starting at the hems of your textile reduce a strip of your towel. You want to make the width of the band three times smaller in width than the finished breadth. Next, use your rotary hedge clippers or sewer scissors and cut one-inch strip, extending a considerable distance than your breadth. (2) Facing down to the right, put your strip on the fabric and level: Once you finish ironing the surface, avoid distorting or stretching your fabric, and press aloft. Press so that it balances with the bandwidth. (3) On the opposite side, press aloft: Press the borders of the strip, forcing the edges between and balancing it with the width of your finished work. At the top layers, and at the raw edges, press the edge if the two do not join. (4) About half inch, press the cloth under at the narrow piece ends of the hems.
Do not stretch your material. Fasten the strip hems with pins in the location of choice. At the outer edges of your fabric, begin stitching and bend the narrow piece. Darn your textile on each side of your cloth, darning until you sew the ends: Next, stitch your lace and serger.
By: Joel Booker
Posts Tagged ‘Rotary Cutters’
Bind and Scallop your Bathroom Accessories
November 2nd, 2009Quaint Bathroom Accessories
September 18th, 2009Imagine a room filled with berry red walls with compliments of motif poppy and stylish slipcovers to offset your quaint bathroom. Throw in a few layered fabrics, such as curtains for your shower to enhance the room. Floral shower curtains are idea for quaint baths designed in berry red wall designs.
How to choose bathroom accessories:
Choosing bathroom accessories is easy if you have your design laid out. Artisans often recommend that you make up a blue print before re-designing your bath even if you are adding bathroom accessories. You want to scope out the area first to consider what accessories would look best in your area.
For quaint baths, you want to keep in mind that you are choosing bathroom accessories for old-fashioned or picturesque rooms. Of course, you want to choose charming items, yet you want to keep it on the traditional level. Sometimes traditional rooms require a twist of odd and peculiar items that make it appealing to the eye. When designing quaint environments, why not consider braided rugs?
How to choose braided rugs:
Braided rugs include the handcrafted rugs made from ‘sweatshirt fleece.’ The rugs are easy to make, otherwise you can find the rugs in any craft store.
How are the rugs made?
From narrow pieces of wool: You can use soft fleece from sweatshirts to make the wool. Choose the high-fiber cottons, since the material is easy washed. In addition, the rugs absorb better than other materials. To create traditional, try using a variety of fibers.
How do I choose materials?
You will need fleece from sweatshirts to create your braid. Choose a variety of colors, unless you prefer plain. You will also need a sewers mat and a pair of rotary cutters, as well as thread designed to hold up to heavy material. In addition, you will need Braidkin, or similar lacers.
How do I choose the needle?
You should consider the large-eye needles, such as the craft needles with round and blunted ends. You will need common craft thread and needles as well.
Do I need anything else to finish the rug?
Sure, you will need clamps to hold your fabric in place. In addition, you will need clothespins, which you can use to secure the ends of your braided rug while adding lace. The last item you will need is a non-slip mat/pad. You want to slip the pad beneath the rug once you are finished.
How do I get started?
Getting started is easy. You merely cut 2-inches into the fleece, and strip it transversely over the width of the material. Take 2 strips of the fabric and bring them together, bringing your fleeces in union, and on the bias begin stitching. You will need to trim the seams making allowances at certain lengths, depending on your volume. To open the seam, use your fingers and press. At the raw edges of our material, fold it until it meets with the middle region and stretch our strip until it faintly rolls the edges inwardly. At the edges, fold, bringing your 3rd strip to the middle of the cloth and fold it again in half. Make sure the sides are open toward the right of the fabric. Next, at your strip, insert your needle and thread, layering it until the strips join, starting again with the first step, leave seam allowances, and fold the strips to join in half. Enclose the end of your third strip, and finish by stitching the rug together. Now you have the bathroom accessories of the century created by your own hands.
By: John Pawlett
